Ladies and Gentlemen) My Instruction: Before entering something into the console, make sure that you have a local network, wi-fi or the Internet configured on the device from which you want to transfer the image and on the other device that you want to receive the image through the browser (If you are a kettle on setting up everything you will find in the Internet) . All the operations that I will write to you, I did on a PC and laptop using a local network. Fortunately, I will not confuse you, I will move on to the main one:
1. (The operations were carried out from the PC) Press the win-R buttons and execute in the line, enter CMD
2. (The operations were carried out from the PC) We have a console with the line C: \ Users \ username> (You can change the path, but I use standard input). In the line we enter the following C: \ Users \ username> jsmpeg-vnc.exe -b 2000 -s 1600x900 -f 60 -p 8080 desktop and hurray the first thing is done, it remains to take the image on the second device
3. (The operations were carried out with a laptop) Open the browser (on the second device) and enter the IP of the first device into the browser line http://192.168.137.2:8080And now it is done, you are taking the image to your device)
The program library should look like this: Playground
It was too lazy to change the path in the console, but in order to quickly figure out the program and write you instructions, I did everything as quickly as possible) As I wrote, I dropped the files here: Playground
FAQ: Which means - -b -s -f -p -b Bitrate -s The screen resolution you want to pass -f Frame rate -p Port
Good luck))
Post edited by DJIGI666 on 07/30/2015 at 00:01:32 AM
Before entering something into the console, make sure that you have a local network, wi-fi or the Internet configured on the device from which you want to transfer the image and on the other device that you want to receive the image through the browser (If you are a kettle on setting up everything you will find in the Internet) . All the operations that I will write to you, I did on a PC and laptop using a local network. Fortunately, I will not confuse you, I will move on to the main one:
1. (The operations were carried out from the PC) Press the win-R buttons and execute in the line, enter CMD
2. (The operations were carried out from the PC) We have a console with the line C: \ Users \ username> (You can change the path, but I use standard input). In the line we enter the following C: \ Users \ username> jsmpeg-vnc.exe -b 2000 -s 1600x900 -f 60 -p 8080 desktop and hurray the first thing is done, it remains to take the image on the second device
3. (The operations were carried out with a laptop) Open the browser (on the second device) and enter the IP of the first device into the browser line
The program library should look like this:
It was too lazy to change the path in the console, but in order to quickly figure out the program and write you instructions, I did everything as quickly as possible) As I wrote, I dropped the files here:
FAQ:
Which means - -b -s -f -p
-b Bitrate
-s The screen resolution you want to pass
-f Frame rate
-p Port
Good luck))
Post edited by DJIGI666 on 07/30/2015 at 00:01:32 AM