andrei-ka26 , For lovers of sharpness: If it seems to you that blurring has occurred, then enable the parameter "#define USE_LUMASHARPEN 1" in the file "SweetFX_settings.txt" (1 enable; 0 disable). You can fix this in the "#define sharp_strength" parameter by setting the value to 1.1 and disabling fxaa in the game. This same value of 1.1 can be wrapped more and more in tune right during the game ...
kurdt_62, Well, to each his own, for example, I do not export MSAA x4 to play 60 fps, I cut MSAA x2 + this mod, I get stable 60 fps and everything is smoothed better than MSAA x2 + FXAA inside the game or MSAA x4, and eats this thing divinely .
The test was conducted on the system: Intel i5-3470 3200 MHz, Boost 3400 MHz GTX 960 (2 GB) 8 GB RAM Monitor 60 Hz 1920x1080
.... Shaundi .... , play on gtx 660 or even gtx 960 +60 fps with normal smoothing, and yes the game can be ideal if you have a top comp and play at least 2k ... I doubt that at least half of the bakers have gtx 960 and the recommended percentage .. .
Now I cut 1.5k in the game and knocked out MSAA and FXAA in the game and enabled SMAA + FXAA v0.5, it seems to be the best option for getting rid of ladders ...
boomeralo, fxaa smaa in ReShade SweetFX is a post anti-aliasing process and all its aspects can be configured in "SweetFX_settings.txt and msaa is hardware anti-aliasing and it eats a lot. I wrote try to enable MSAA x2 + SMAA + FXAA v0.5 in the game better than MSAA x4. That is, msaa and fxaa smaa in ReShade SweetFX will work together and anti-aliasing wakes up better here's a life hack from ReShade developers http://reshade.me/
Post has been edited 19lexa19 on 10/17/2015 at 17 : 48: 49
LEXUS61ru, I play not banned, this mod does not replace or replace the game files, it only adds anti-aliasing and saturation. Rockstar stated that she will not be banned for cosmetic modifications ...
GTAmer, Firstly, GTA V itself has FXAA and MSAA anti-aliasing. Secondly, one FXAA built into GTA V eats more than SMAA + FXAA in ReShade 0.19.2 SweetFX 2.0, but SMAA + FXAA looks twice better than built-in FXAA. Even MSAA 2x looks worse than in this mod, and eats 15-20 FPS. It turns out it makes sense to play with FXAA + MSAA 2x in the game itself but lose 30-35 FPS when my mod takes 8-12 FPS and looks not much worse than FXAA + MSAA 2x. You can turn on MSAA 4x and everything wakes up clearly smoothed out, but I won't see 80-65 FPS on the GTX 660, there will be drawdowns up to 45 FPS, but for me it's brakes. And by the way, ReShade 0.19.2 SweetFX 2.0 is a shader modification, and as the author claims, it is optimized in all games. http://reshade.me/ That's the whole point of playing with better anti-aliasing and losing less FPS.
AndreasGT, MSAA is not for gtx 660 and even gtx 960 in gta V to play 80-65 FPS.
LOLplayer, At 1.0.7.0. cut graph.effects and enb to 1.0.4.0. works better. The most sane enb settings are for 1.0.4.0, the only problem with this patch is that some script mods do not work ...
Goshannich, DX11 only. Install "ReShade Setup.exe" in the game folder in the archive "ReShade 0.18.7 Public Beta with SweetFX 2.0 Beta 8", then throw off my session SweetFX_settings.txt
fantom2015, Of course important, this is an important library that works through DX11. There is an option to install SweetFX using a new link: SweetFX DX11 only.
Vlad59ru, I'm doing great on Steam. And yes it is only for DX11.
From the person who posted: Should be ideal for GTX 660 to play at 60 FPS with proper graphics settings, performance-to-picture quality ratio. My computer is i5-3470, gtx 660 2gb, 8gb RAM, I have 80-70 fps with a maximum drawdown of 65 fps.
Semods, If you set it up as in the instructions, then fps should increase, especially in comparison with the original Simple ENB for natural v0.79.2, on the screenshots you see off shadows, but shadows remain under the cars and the overall picture does not deteriorate ...
The post has been edited by 19lexa19 on 06/07/2015 at 13:00:57
I have an off-topic question ... Who has an Xbox 360e 250gb, if you buy it and flash Freeboot to install GTA5, does it slow down? And is there any graphics and traffic density settings in gta5 on the console ... And how, in general, is xbox 360 worth buying for someone who has never played on consoles at all, as for graphondrocherstvo, I am slightly fastidious, the main thing so as not to slow down ... Well, gambling on consoles like dofig ...
The post has been edited by 19lexa19 on 03/31/2015 at 13:01:23
d3d9, Even I think if Nvidia assigns Rockstar then we will play slideshows and friezes ... like in far cry 4 ... the same graphon as in far cry 3, even as for me the garbage and fps blurred by the effects, as I have four times sagged and doher friezes on 4x i5 3.2Ghz; RAM: 8gb; gtx 660
GTA_Masters19, Well, you played far cry 4 at 30fps on PC, the optimization is just awful. Far cry 3 at maximum speed without super-anti-aliasing super-flew and fk4 on the lowest graph lags freezit and for me 45-25 freeze fps in the eyes of frames like texture slides I overflow with loading ... Therefore, 30fps in PC games rather than in video, such as movies, is always something in games is lagging and therefore it turned out fk4 super igruha, but optimization is only for top-end PCs ... top PCs at units and there 30fps does not lag ... so let them make gta5 under 60fps it will be two, three times less lagging .. ...
Billy, Good dude with GTX 660 Palit had problems with the cooler? I have something covered and hike because of some kind of mod for GTA 4 with a high resolution texture, and the cooler does not work at all ... I rearranged the entire system up to the bios and now there is one opportunity to heat the vidyuhu to 100 degrees and then the vent starts up and you have to fix it at 73% speed ... Complete nonsense has not passed even two years ... I advise you not to put enb and textures with high resolutions ... Maybe Palit is bullshit ...
The spider model is very heavy and can be stupid when loading, so it's best to load it in the house or load another one and mount it in componentpeds.img, having previously renamed both files in ig_bledar
danil22, It should go to GTA 4, if you don't copy the files for Episodes, I can't check it myself, since I don't have a regular gta, but I edited timecyc.dat and it should be the same as in TBoGT, try to unsubscribe ...
And I also forgot to say do not write in commandline.txt there is nothing connected with vidyuha, otherwise SweetFX will disconnect ...
strelok47, Today I'll post the latest version there and it will be almost like standard graphics, but about ENB they are not normal enough, they are either very colorful to horror, sometimes dull, and for a while they generally turn everything into shit ...
Happy New Year ... Let GTA 5 come out in a month with excellent optimization and we will forget for a while about mods in the top five, they will not be needed and there are so many gadgets ... Except again to cut optimizations ...
Damn, if under what conditions Rockstar GTA V is not ported to PC, then they will be fuckers, since the online is excellent and obviously even the bulk of pirates will buy it ... well, in general, this is, for me, the coolest igruha in the gaming industry and to score on a PC - it's stupid for your own benefit ... And then I will be offended and cry and pirate further ... But I think Rockstar will not dull, finish it online and port ... I, for example, bought FarCry3 because of the multiplayer, although it sucks ...
Active links to external resources are FORBIDDEN. Corrected.
The post has been edited by Viktor Mor on 03.24.2014 at 10:11:13
Vacyan, In short, someone's hands have crooked bottoms, I have a face and everything works. And you also need to read the instructions in the archive, you need the EFLC FIX 1.2.0 patch from this site, I wrote in the archive ...
I have a question why my mod is not pumped enough? After all, it optimizes much better than GTA EFLC Accelerator 1.0, RealityIV and VISIAL IV? And the picture is like ENB almost; image sharpness, drawing distance more without loss of FPS and now there are no artifacts. You need to understand the GTA IV editor and record the video what is and how it works and what picture? I have not written a video before how to record 6 minutes from the game itself?
TAHKICT, I don't have GTA 4 usual and I have no desire to install, so I can't do it on a regular one ..
Artem.1.9.9.6, You have to say 1000 times my settings are even lower than those of the famous mod GTA EFLC Accelerator 1.0, RealityIV and VISIAL IV ... and they look better in the graph; add brightness and saturation in the game settings to almost full ... You will test on your LowPC, and on my MediumPC-HighPC. I took and edited the LowPC settings for even higher FPS and what do you think happened under the HighPC?
IceCreedModsFor me, 40-50 FPS is already laggy, when below 60 I feel uncomfortable, for example, everyone has different perceptions. Tembolia in GTA 4 slop engine smoothly goes the picture only at 60-70 FPS as for example in BF4 even at 30 everything is exactly
destroy, I said above this for any and weak computer ... The meaning of the settings is reduced all settings: reflections, rendering of some objects to reasonable, blur removed, removed 2 sunny weather, 3 of them, added simple and normal textures of shadows, sky, etc. removed restrictions in memory, etc. And you should go just remove the -dx10 line in the commandline.txt file; For example, I use only 600 MB of vidyuhi, although I have 2000 and you have 512 MB. So try to look at FPS without a mod and then with mods and you will see the difference; my settings are even lower than those of the famous mod GTA EFLC Accelerator 1.0, RealityIV and VISIAL IV ... and look better in the graph; add brightness and saturation in the game settings to almost full ... In general, try and unsubscribe if it's easy ...
deniiiisko, Removed 2 sunny weather, 3 of them, I don’t know this is not so much, in comparison with all sorts of ENB where it’s a fuck-up how dark or bright to disgracefulness, or the hellish sky crawls out as hell
19lexa19
The post has been edited by 19lexa19 on 03/10/2014 at 14:47:45
TaylorGang563, In our time, this is an average PC, and it’s fast and weak, even gta 4 did not pull normally ... And as for the mod, it is configured for weak computers, so now I have 80-110 FPS. The post has been edited by 19lexa19 on 03/09/2014 at 19:14:44
TaylorGang563, Windows 7 Ultimate x64-based PC Intel (R) Core (TM) i5-3470 CPU @ 3.20GHz, 3501 MHz, cores: 4 (RAM) 8.00 GB GTX-660 It was 50-60 FPS, and in missions it sagged to 30-40 and a storyboard was observed; It became 80-110 and in missions the maximum sags to 60-70, there is no storyboard; Toyota FPS increased by 50 percent, and most importantly, now I almost never see the storyboard, for me this is the final mod, everything suits; Now think about it and decide if you need a smoother and more consistent FPS
degtev.misha , only for episodes ... No, GTA V has already surpassed all the games, for me it will be the best when it comes to the PC and receives the next crooked port ... I do not like joysticks and consoles, I’ll better play with lags
Monty, I consider the author of the t-ru mod because I mainly used and modified its Amazing Performance and Graphics mod for raising the FPS. I edited almost all the files, completely timecyc.dat, also some weather conditions were replaced. That is, I removed and edited everything from the mod that took FPS and slowed down the game and added textures, such as shadows, because they seemed to take a lot of resources, etc. So far I have reached the most constant and highest FPS, in comparison with mass optimization mods. Thanks t-ru for the shaders settings, since I am 0 in this, and I am the second-type person in this mod ...
MAV3RIQ, The only reason why the mod may not work (although this is nasty) is due to the shaders folder along the EFLC \ common \ path, if something does not work, do not replace it ... Read the instructions inside the archive there everything is described what to do ...
good2me , About the patch, you're right, you could not add it, but with this cracker (it's somebody else's beta + edited) and this crack (the author wrote that fixed something in the crack and crack) where I downloaded half a year ago, I personally work correctly asi scripts, and before in the missions it was just all tightly hung during the calls and I tried many methods that helped only this one. And what if there is a patch 1.1.2.0 now all of the site to drive when you can download in one place? It's not convenient to get ... About FPS at a certain time (5 nights) FPS sags because in timecyc.dat this parameter at this time is not edited and accordingly it works at 5 o'clock in the morning as in the original timecyc.dat - that's FPS and sags at this moment ... About the fact that with the Yandex drive, I'm not looking for personal gain, who needs to be cured of the game from glitches let it rock, puts at least + at least - I like it vseravno I do not have anything from this ...
The post has been edited by 19lexa19 on 03-04-2014 at 03:15:34 AM
good2me , Damn do good to people, they also criticize ...
good2me, I HZ how it is written there the main thing now all the mods work and the FPS does not sag ... And who told you that I was a genius Uncle Petya? Aunt Motya?
The post has been edited by 19lexa19 on 03/04/2014 at 00:51:48
If it seems to you that blurring has occurred, then enable the parameter "#define USE_LUMASHARPEN 1" in the file "SweetFX_settings.txt" (1 enable; 0 disable). You can fix this in the "#define sharp_strength" parameter by setting the value to 1.1 and disabling fxaa in the game. This same value of 1.1 can be wrapped more and more in tune right during the game ...
The test was conducted on the system:
Intel i5-3470 3200 MHz, Boost 3400 MHz
GTX 960 (2 GB)
8 GB RAM
Monitor 60 Hz 1920x1080
play on gtx 660 or even gtx 960 +60 fps with normal smoothing, and yes the game can be ideal if you have a top comp and play at least 2k ... I doubt that at least half of the bakers have gtx 960 and the recommended percentage .. .
Now I cut 1.5k in the game and knocked out MSAA and FXAA in the game and enabled SMAA + FXAA v0.5, it seems to be the best option for getting rid of ladders ...
fxaa smaa in ReShade SweetFX is a post anti-aliasing process and all its aspects can be configured in "SweetFX_settings.txt and msaa is hardware anti-aliasing and it eats a lot. I wrote try to enable MSAA x2 + SMAA + FXAA v0.5 in the game better than MSAA x4. That is, msaa and fxaa smaa in ReShade SweetFX will work together and anti-aliasing wakes up better here's a life hack from ReShade developers http://reshade.me/
Post has been edited 19lexa19 on 10/17/2015 at 17 : 48: 49
I play not banned, this mod does not replace or replace the game files, it only adds anti-aliasing and saturation. Rockstar stated that she will not be banned for cosmetic modifications ...
I haven't tested it ...
Firstly, GTA V itself has FXAA and MSAA anti-aliasing. Secondly, one FXAA built into GTA V eats more than SMAA + FXAA in ReShade 0.19.2 SweetFX 2.0, but SMAA + FXAA looks twice better than built-in FXAA. Even MSAA 2x looks worse than in this mod, and eats 15-20 FPS. It turns out it makes sense to play with FXAA + MSAA 2x in the game itself but lose 30-35 FPS when my mod takes 8-12 FPS and looks not much worse than FXAA + MSAA 2x. You can turn on MSAA 4x and everything wakes up clearly smoothed out, but I won't see 80-65 FPS on the GTX 660, there will be drawdowns up to 45 FPS, but for me it's brakes. And by the way, ReShade 0.19.2 SweetFX 2.0 is a shader modification, and as the author claims, it is optimized in all games. http://reshade.me/ That's the whole point of playing with better anti-aliasing and losing less FPS.
AndreasGT,
MSAA is not for gtx 660 and even gtx 960 in gta V to play 80-65 FPS.
At 1.0.7.0. cut graph.effects and enb to 1.0.4.0. works better. The most sane enb settings are for 1.0.4.0, the only problem with this patch is that some script mods do not work ...
DX11 only.
Install "ReShade Setup.exe" in the game folder in the archive "ReShade 0.18.7 Public Beta with SweetFX 2.0 Beta 8", then throw off my session SweetFX_settings.txt
Of course important, this is an important library that works through DX11. There is an option to install SweetFX using a new link:
DX11 only.
Vlad59ru,
I'm doing great on Steam. And yes it is only for DX11.
From the person who posted:
Should be ideal for GTX 660 to play at 60 FPS with proper graphics settings, performance-to-picture quality ratio. My computer is i5-3470, gtx 660 2gb, 8gb RAM, I have 80-70 fps with a maximum drawdown of 65 fps.
Screenshots with my settings
The post has been edited by 19lexa19 on 06/10/2015 at 00:36:50
download TimecycIV 1.0 and decrease the Multiplier in the Sky parameter and increase the Start of fog value in the Other parameter
Nico Bellic RUS,
And yes, I would have done so myself, if the textures were not soaped ...
If you set it up as in the instructions, then fps should increase, especially in comparison with the original Simple ENB for natural v0.79.2, on the screenshots you see off shadows, but shadows remain under the cars and the overall picture does not deteriorate ...
The post has been edited by 19lexa19 on 06/07/2015 at 13:00:57
files are encrypted.
And how, in general, is xbox 360 worth buying for someone who has never played on consoles at all, as for graphondrocherstvo, I am slightly fastidious, the main thing so as not to slow down ... Well, gambling on consoles like dofig ...
The post has been edited by 19lexa19 on 03/31/2015 at 13:01:23
Even I think if Nvidia assigns Rockstar then we will play slideshows and friezes ... like in far cry 4 ... the same graphon as in far cry 3, even as for me the garbage and fps blurred by the effects, as I have four times sagged and doher friezes on 4x i5 3.2Ghz; RAM: 8gb; gtx 660
all sorts of crap like fur technology, anti-aliasing ... nothing needed ... only for top pc plus sign
Well, you played far cry 4 at 30fps on PC, the optimization is just awful. Far cry 3 at maximum speed without super-anti-aliasing super-flew and fk4 on the lowest graph lags freezit and for me 45-25 freeze fps in the eyes of frames like texture slides I overflow with loading ... Therefore, 30fps in PC games rather than in video, such as movies, is always something in games is lagging and therefore it turned out fk4 super igruha, but optimization is only for top-end PCs ... top PCs at units and there 30fps does not lag ... so let them make gta5 under 60fps it will be two, three times less lagging .. ...
Good dude with GTX 660 Palit
had problems with the cooler? I have something covered and hike because of some kind of mod for GTA 4 with a high resolution texture, and the cooler does not work at all ... I rearranged the entire system up to the bios and now there is one opportunity to heat the vidyuhu to 100 degrees and then the vent starts up and you have to fix it at 73% speed ... Complete nonsense has not passed even two years ... I advise you not to put enb and textures with high resolutions ... Maybe Palit is bullshit ...
It should go to GTA 4, if you don't copy the files for Episodes, I can't check it myself, since I don't have a regular gta, but I edited timecyc.dat and it should be the same as in TBoGT, try to unsubscribe ...
And I also forgot to say do not write in commandline.txt there is nothing connected with vidyuha, otherwise SweetFX will disconnect ...
you need the EFLC FIX 1.2.0 patch from this site I wrote in the archive ...
The post has been edited by Viktor Mor on 03.24.2014 at 10:11:13
In short, someone's hands have crooked bottoms, I have a face and everything works.
And you also need to read the instructions in the archive, you need the EFLC FIX 1.2.0 patch from this site, I wrote in the archive ...
TAHKICT, I don't have GTA 4 usual and I have no desire to install, so I can't do it on a regular one ..
You have to say 1000 times my settings are even lower than those of the famous mod GTA EFLC Accelerator 1.0, RealityIV and VISIAL IV ... and they look better in the graph; add brightness and saturation in the game settings to almost full ...
You will test on your LowPC, and on my MediumPC-HighPC. I took and edited the LowPC settings for even higher FPS and what do you think happened under the HighPC?
The meaning of the settings is reduced all settings: reflections, rendering of some objects to reasonable, blur removed, removed 2 sunny weather, 3 of them, added simple and normal textures of shadows, sky, etc. removed restrictions in memory, etc.
And you should go just remove the -dx10 line in the commandline.txt file; For example, I use only 600 MB of vidyuhi, although I have 2000 and you have 512 MB. So try to look at FPS without a mod and then with mods and you will see the difference; my settings are even lower than those of the famous mod GTA EFLC Accelerator 1.0, RealityIV and VISIAL IV ... and look better in the graph; add brightness and saturation in the game settings to almost full ...
In general, try and unsubscribe if it's easy ...
deniiiisko, Removed 2 sunny weather, 3 of them, I don’t know this is not so much, in comparison with all sorts of ENB where it’s a fuck-up how dark or bright to disgracefulness, or the hellish sky crawls out as hell
19lexa19
The post has been edited by 19lexa19 on 03/10/2014 at 14:47:45
In our time, this is an average PC, and it’s fast and weak, even gta 4 did not pull normally ...
And as for the mod, it is configured for weak computers, so now I have 80-110 FPS.
The post has been edited by 19lexa19 on 03/09/2014 at 19:14:44